Our MBR Tank (Membrane Bioreactor Tank) is a purpose-built reactor vessel for high-efficiency wastewater treatment. Unlike conventional sedimentation-based tanks, this MBR tank integrates a membrane filtration zone directly into the biological treatment basin. It is prefabricated with internal guide rails for submerged flat sheet or hollow fiber membrane modules, a coarse bubble aeration grid for membrane scouring, and a sloped bottom for sludge concentration. Manufactured from corrosion-resistant PP, PE, or SS304/316, our MBR tank can handle MLSS up to 15,000 mg/L – three times higher than conventional tanks. The result is superior effluent quality (SDI < 3, turbidity < 1 NTU) with 50% smaller footprint.
Hebei Fortis Technology Co., Ltd Product Brochure
Product Advantages
Integrated Membrane Rack System
Factory-welded stainless steel guide rails and fixing brackets allow direct drop-in installation of all major MBR brands (Kubota, Mitsubishi, Memcor, Sinap). No on-site drilling or alignment required.
Optimized Air Scouring Grid
Perforated aeration pipes positioned exactly under membrane cassettes create uniform rolling bubbles, reducing fiber clogging and extending chemical cleaning intervals to 6+ months.
Tapered Sludge Collection Bottom
60° slope hopper bottom eliminates dead zones, achieving sludge concentration of up to 20 g/L without external thickener – reducing sludge handling cost by 30%.
Anti-Floating Scum Baffle
Submerged inlet and surface scum skimmer keep grease and floating debris away from membrane fibers, preventing irreversible fouling.
Modular & Expandable
Tanks designed with multiple flange ports for future membrane cassette addition. You can upgrade capacity by +50% without replacing the tank.
Contact us immediately to discuss your product project requirements
Navigation
Navigation
Contact Us
Tel.: +86 189 3266 2725
E-mail: sale@hbfortis.com
Add.: No.8-1, Zhenxing Street, Matun Town, Zaoqiang County, Hengshui City, Hebei Province
Get in Touch
Get in Touch