Material: Fiberglass (uncoated glass fiber cloth / chopped strand mat) serves as the reinforcing framework, with an unsaturated polyester/SMC mold plastic as the base material. Anti-UV, flame-retardant, and weather-resistant additives are incorporated. The surface is predominantly matte green/gray to prevent secondary reflections.
Forming process: Mainly SMC molding (high dimensional accuracy, good strength), supplemented by pultrusion and hand layup. Common shapes include flat plates, S-shaped/reverse S-shaped, and leaf-shaped designs. Standard dimensions typically range from 800 to 900 mm in height, 200 to 240 mm in width, and 3 to 5 mm in thickness.
Implementation standards: GB/T 24718 (glass fiber reinforced plastic anti-glare panels), JT/T 333 (Technical Conditions for Highway Anti-glare Facilities); key indicators include shading angle (≥ 8°–10°), wind load resistance, resistance to extreme temperatures, and salt fog resistance.
Lifespan: SMC high-quality products can last for 15–20 years, far surpassing ordinary HDPE plastic boards.
Hebei Fortis Technology Co., Ltd Product Brochure
Product Advantages
Anti-glare and efficient: matte finish + precise cut-off angle, effectively blocks opposing high-beam headlights, preventing mirror-like reflections and reducing visual fatigue during nighttime driving.
Lightweight and high-strength: with a density of approximately 1.8–2.0 g/cm³, it is only 1/4 the density of steel. It can be easily transported and installed by one person. It withstands wind loads of ≥1.5 kPa and is resistant to impact without easily cracking.
Weather-resistant and corrosion-resistant: resistant to acid rain, salt fog, and ultraviolet rays. Stable in temperatures ranging from -40°C to 80°C. Does not fade or powder over time when used in coastal, high-altitude, or desert regions.
Insulating and maintenance-free: non-conductive, free from rust, requiring no frequent painting or maintenance, significantly reducing the cost of road maintenance.
Easy installation: secured using bolts/snap fasteners to wave-shaped beam guardrail or specialized pillars, with a short construction period.
Related Products
GFRP Sewage Tank Cover Plate | Factory-Direct Exporter for Wastewater Projects
China factory-direct exporter of GFRP sewage tank cover plates. Anti-corrosive, lightweight, high-load capacity for municipal & industrial wastewater systems. Get OEM price & fast shipment.
Fiberglass GFRP FRP Sewage Tank Cover Plate for Odor-Tight Access Covers
Eliminate H₂S corrosion on steel lids. Our FRP covers weigh 70% less than cast iron, with built-in gasket seals & gas vent ports. Load capacity 5 kN/m². Provide tank opening drawings for custom ring flanges.
Fiberglass GFRP FRP Demister Wire Mesh Mist Eliminator for Scrubber Evaporator FT-d1
High-efficiency wire mesh demister pads for gas-liquid separation. Remove >99.9% of droplets ≥5µm. Stainless steel, Teflon, PP or FRP. Low pressure drop. Get a quote with free sizing calculation for your column or scrubber.
Fiberglass GFRP FRP Window Blinds for Corrosion-Resistant Custom Sizes FT-WB1
Factory direct FRP window blinds – non-corrosive, flame-retardant, and suitable for chemicals, marine, and food plants. Wide slat options with easy louver adjustment. Get a custom quote for your project size today!
Contact us immediately to discuss your product project requirements
Navigation
Navigation
Contact Us
Tel.: +86 189 3266 2725
E-mail: sale@hbfortis.com
Add.: No.8-1, Zhenxing Street, Matun Town, Zaoqiang County, Hengshui City, Hebei Province
Get in Touch
Get in Touch
